A9 Wifi Mini Camera Apple IOS operations are as follows
Install the application
Download and install JXLCAM. lOS searches for “JXLCAM” download directly at the Apple App Store. For convenience, please scan the download and installation of the QR code below. Note: during installation, all permissions of the JXLCAM APP need to be allowed, otherwise the APP will not work properly.
Please select app to download.
Local mode
Open the list of mobile phones WIFI, connect to B/xCCQ…, open the APP 
page after success, click “AP” as shown in the figure below, and watch the video.
Note: when there is no WIFI in the environment, you can use AP mode to connect, which is valid for no more than 10m, which can achieve localized video viewing.
Remote mode
- First confirm that there is a available WIFI near the device, turn on the device, flash the blue indicator light quickly, and the device is in a state to be connected. ( Note: WIFI signals supported only in the 2.4G band)
- You cant successfully distribute the network when the power is insufficient.
- When wiring, please try to bring the device close to the router. When the nearby WIFI signal is weak, the image will be stuck if the network is not successful or the network is successful.
- Open the APP and follow these steps:
Home page icons and button instructions
Description of icons and buttons on the video page
Storage card
If you need to store video content, you need to install an SD card. (This machine supports loop video recording)
Camera settings
NOTE:
- When the device fails to configure the network, please check whether the router and WiFi password are configured correctly (the device does not support WIFI signals in the 5.8G band). After confirming that it is correct, you can press and hold the reset button until the device indicator flashes quickly, restore the factory settings, and reconfigure network.
- When the software homepage shows that the device is offline, you can check whether the device is normally powered on, and click the refresh icon in the upper right corner to refresh.
- The initial password of the device is admin.
Read more: https://manuals.plus/jxlcam/jxlcam-a9-wifi-camera-manual#ixzz7phFvKFTR